The mixer offers unbalanced input and output connections, making it suitable for simpler setups where balanced connections are not required. 25 Hz – 20 KHz – The wide frequency response ensures that both low-end bass and high-end treble frequencies are accurately captured, delivering a full spectrum of sound. The built-in digital echo effect ranges from 20 ms to 400 ms, allowing for the addition of reverb and delay effects to your mix for enhanced soundscapes. Each channel is equipped with 30 mm faders that allow for smooth and precise control over volume levels, giving you the ability to fine-tune your sound. The mic input has an impedance of 2K Ohms, optimized for dynamic and condenser microphones, providing clear and crisp vocal input. The mono line input has an impedance of 10K Ohms, suitable for connecting instruments or other audio equipment. Gain can be adjusted from -10 dB to -50 dB, providing a wide range of control to accommodate different input levels and sources. With a 70 dB S/N ratio, the mixer delivers clean and clear sound with minimal background noise. Extremely low distortion at 0.01%, ensuring your sound remains clean and accurate. Adjust the tonal balance of your mix with Bass (±16 dB), Mid (±10 dB), and Treble (±16 dB), allowing you to shape the sound to your preference. The Effect Return is adjustable up to -30 dB max, giving you control over how much of the external effects are blended into your final mix. The Effect Send can output from 0 dB to 5.5V Max, sending the audio signal to external effects processors for additional sound manipulation. Clip LED indicators on each channel help to monitor the input levels, ensuring you're not overloading the mix and maintaining optimal sound quality.