Physiogears Interferential Therapy is one of the types of electrotherapy used for the management of pain. IFT is widely used for pain relief, muscle stimulation, increased local blood flow and reduction of oedema. The principle of interferential therapy is to cause two medium-frequency currents of slightly different frequencies to interfere with one another.Computerized Inter Farential Therapy machine with Mid-frequency current makes it very attractive and free from analog knobs systems. It contains concept is completely soft touch unit. The circuit is based on Micro Processors based which different programs for the different type of treatment applications. # Technical Specification (1)Different applications based on Digital Pre Programs (2)A current module of 4-channel Electrotherapy machine (3)Separate Display for timer, intensity and beat frequency (4)Include TENS; Faradic and Galvanic current (6)Input Supply : 220V Ac, 50 Hz (7)Therapy modes : 4P, 4PV, 2P (8)Carrier Frequency : 2,4KHz (9)Base 0-150 Hz (10) Sweep : 0- 100Hz (11)Output current: 0-100 mA Ultrasound Therapy unit TECHNICAL SPECIFICATION: Ultrasonic nominal Frequency : 1 Mhz Ultrasonic Output : 15Acousstic Maximum Ultrasonic power density mode Operation : 2.2 watts/cm2 Continuous and of pulsed mode. Pulse ratios : 1:1, 1:3, 1:5, 1:7, 1:9 Timer : Electronic timer 0to 99 minutes with digital display Display :Digital display Accessories : 4 IFT Wire ,4 IFT Electrodes,1 Main cord ,1 velcro 1, US Applicator 1, Carry Bag 1,