NSUSU Folding Shelf Brackets 20 Shelf Bracket  (Iron)

NSUSU- Important Information: Notes: 1. There are no wood boards included. 2. The installation should be level, and the screws installed in place to avoid loosening. 3. The short arm of the folding shelf bracket should be mounted on the wall and the long arm should be affixed to the wood board/plank. Step 1 : - Open both wall brackets until it locks its position. - Place it on wall at the desired height (recommended height 30 inches for adult and lesser for kids) - If possible, level it using "water level". - Mark the screw holes using pencil. - Remove the table and drill holes and insert wall plugs (provided along with screws). - Screw the wall brackets to the wall as shown in figure 1. - Wall must be solid wood, brick work or concrete only. Step 2 : - It can be folded white not in use. - Pull the sider on both brackets as shown in figure 2 to fold the table. - The table will look like as below as open conditions .