Robotbanao 1S-8S LiPo Battery Voltage Tester With Low Voltage Buzzer Alarm Electronic Components Electronic Hobby Kit

The LiPo Battery Voltage Checker 1S-8S with Buzzer is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of the battery pack. This unit also features a handy built-in LED display that will show the voltage of each cell followed by the overall voltage of the pack. Don’t risk your model by flying on depleted batteries. Simply connect the battery balance plug to the leads of this voltage checker, it will show the instant voltage of each cell one by one ending with displaying the voltage of the total pack. The Li-PO Voltage Checker 1S-8S with Buzzer Alarm is equipped with loud twin piezo alarms which will notify you once your cells reach a low voltage or user defined voltage. You can customize the alarm to sound at a voltage between 2.7v-3.8v per cell in 0.10v increments. It has a mode button at the top for setting the desired voltage value. This LiPo Battery tester detects the voltage of each battery core automatically, support reverse connection protection. To know the working state of your battery anytime, protect the battery from overcharge and over discharge. The red LED will flash, the Lipo alarm buzzer will beep when the voltage is below the set point. The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically.That's where our 1-8s lipo battery voltage tester/monitor comes in. First, this unit can be used to test your battery's voltage. It will display the total voltage of your battery, then cycle through and display the voltage of each individual cell. FEATURE This product is using for detecting 1S-8S lithium battery Detect the voltage of each battery core automatically, support reverse connection protection. To know the working state of your battery anytime, protect the battery from overcharge and over discharge. The red LED will flash,the buzzer will beeping when the voltage is below the set point. The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically. Useful for measuring each cell voltage. Cell Voltage Display Range: 0.5v-4.5v Total Voltage Display Range: 3.7-36v