SAPI'S Carburetor Cleaner Air Intake and Carburetor Choke Fuel Oil Spray Cleaner Engine Cleaner  (145 ml)

MULTIPLE APPLICATION: Use as starting fluid in hard-to-start gasoline engines. For the PCV valve with a stuck piston, disconnect the PCV hose and spray into the valve; reconnect the hose and start the engine. Spray at the base of heat risers to distribute shafts, lifters, and valve guides for easy removal. ENGINES PERFORMANCE & EFFICIENCY: The throttle, body, and card cleaner specifically work on hard starts, rough idling, and stalling by dissolving harmful fuel system deposits and stockpiles, which as a result benefits the engine’s performance, longevity, and fuel efficiency. FOR AUTOMOBILE PARTS: The throttle body and carb cleaner easily penetrate the accumulated grease and dirt present on the automobile and bike’s engine parts. It helps in dissolving piled-up dirt, gum, carbon, and varnish deposits that can impede moving parts. HOW TO USE: Remove the air filter and spray the exterior carburetor linkage. To remove the gun and garnish it from the throttle plate, spray short bursts into the carburetor bowl while the engine is idling. Can be easily used for the automatic choke, PCV valve, and manifolding the heat controls of the engine. PRECAUTIONS TO KEEP IN MIND: The product is extremely flammable. It cannot cause serious health issues if swallowed or comes into contact with your eyes. So make sure you use this product carefully, and use it with adequate ventilation. Also, keep it out of reach of children.