TMM Invisible Waterproof Agent, Patch & Seal Liquid, Crystal Clear, 300 ml Adhesive  (300 g)

Waterproof Patch & Seal Liquid is a flexible, rubberized coating that seals out water, air and moisture. It can be applied by brush, roll, trowel, dip or pouring. Ensure the surface is completely covered. Once applied, the self leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Waterproof Patch & Seal Liquid is paintable and temperature/UV resistant resulting in lasting repairs! Not for continuous submersion or below-waterline use.GREAT FOR :- Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber, Glass and More! For exterior use only. Not intended for inside of firebox or chimney stack. How to Use Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely. Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours. NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4". Apply between 50F and 120F CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers. STORAGE: Remove excess product from top of can with a dry cloth. Press or lightly tap lid shut to create tight seal. Waterproof Coating, Super Strong Waterproof Anti-Leakage Agent Invisible Waterproof Agent, Waterproof Insulation Sealant Transparent Repairing Leak Waterproof Adhesive When the ground is wet or rainy, this product can not be used.