VAI Automotive Spray Paint Splendid Silver RC Colour Name + GC Compatible for Maruti Silver Spray Paint 450 ml  (Pack of 3)

Splendid Silver -Base Coat and GLOSS CLEAR-Top Coat , is Combo 2-pack system, based on Super Quality Polyurethane (PU) Binder, It is Superb Metallic spray paint Especially developed for Maruti Brezza, Baleno,Ertiga,XL6 and Grand Vitara automotive Vehicles Touch-up / paint rework and scratch removing needs. VAI paints are excellent for general uses, its coat durable against heat and prevents the metal surface from rust. It’s Fast-drying, long lasting, vibrant, High Gloss, Excellent Coverage, Corrosion Resistance, highly adhesive on wood, plastics and metal surfaces, With shades and types of colors invented specifically to coat perfectly and refinishing. How To Apply: 1- Clean the surface area where you want to use the spray paint for any water, oil, grease, durt, rust etc, If Surface is rusty or non uniform, use 800 No. grit sandpaper to Smooth the Surface. To get better anti-rust performance on metal surface, apply VAI primer surfacer Spray paint as a base coat. 2- Shake the can well. Gently press the top of the spray nozzle and direct to the target area at 6-7 Inches distance, spray the target area in stroking motion every 2-3 minutes for 2 to 3 coating till you get the desired look. Keep repeating for several times and get better effect. After use, invert the Can and press the nozzle without fail to Clean spray button, 3-Remember Use Splendid Silver - base coat first, and only after completion and drying (3-5 minutes) of this step apply GLOSS CLEAR- Top Coat over the base coat applied area. VAI Scratch filler putty is best for filling and levelling minor dent and scratches on the metal surface. Before applying, clean the surface for any rust, dust, oil etc. sand with 320 no. grit sandpaper. Apply thin coats of VAI Scratch filler putty with putty knife whereever is necessary with 15 to 20 minutes flash off between coats. Deep dents shall be filled in thin layers with an interval of 20 minutes for each thin coat and allow to dry . After thorough drying, wet sand wi