XZRTZ Manual Driver Side For Honda Mobilio  (Interior)

Specification: Color: Black Mirror Material: Glass Shell Material: ABS Product Size: 7.5 * 5.5 * 6cm / 2.95 * 2.16 * 2.36" Installation: 1. Select the suitable position(Can sit in the driver's seat to adjust the installation position, in order to see the front-wheel bland spot. Try to install it at the outside of review mirror as much as possible) 2. Tear off the adhesive tape's protective film, stick it on the selected position(Please pay attention on the adjusted position and then press tight) 3. After pasted, you can 360° rotate it and adjust to any angle. 4. Press the outer mirror, and adjust to the suitable view. 5. According to the paste's character, please don't move， wash the car or connect with water within 24 hours after pasting, otherwise the mirror may fall off. Attention: While installing, focus on the front-wheel round mirror, since the rear mirror is adjustable, but the front wheel round mirror cannot. Please do alignment of the front wheel when install the mirror. Warm Tips： 1. Please install it at the position that won't obstruct driving; 2. Before do any installation, please clear the position where you are going to paste, and keep in dry for best fit. Note: Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting. Thank you for your understanding, nice day!