apar HT High Heat Resistant Spray Paint MATT BLACK (upto 600°C) -440 ml + P-600 Black Spray Paint 440 ml  (Pack of 1)

Apar Heat Resistance Spray Paint formulation is based on heat resistance pigment and silicon resin, Specially designed to use over the high heat surfaces like Silencer, automotive exhaust parts, furnace, fire pits, wood-burning stoves, radiators, heat exchanger, oven, boiler, mufflers, chimneys, etc. It builds up a high temperature (upto 600°C) and corrosion resistant protective coating. This Exclusive formula Provide instant surface drying and coatings becomes harder on getting heat during component operational. How To Apply: 1-Remove dirt, wax, grease, moisture, rust etc. Sand with 600 No. grit emery paper, for smooth finish. Shake can vigorously. Make sure silencer or component should be at room temperature. 2- Hold can straight and spray from a distance of 10""-12"" in stroking motion. Apply light coat, repeat after 5 minutes, if necessary. After use, invert the Can and press the nozzle without fail to Clean spray button 3- After Dry for 1 hour, allow component to Exposure heat at 180°C for 30 mints, for getting immediately hardness"