ChargerLab USB Cable Voltmeter  (Digital)

ChargerLab Power - Z KM003C 10 Features Function Charging Info Test Plug and play, It Measures Voltage, Current and Power. Real Time Charging Curve Real time data curve of Voltage, Current, D+/D-, CC1 and CC2 Charging Protocol Test Auto Detection: It will detect all the supported charging protocol, It can support FCP, SCP, AFC, QC3.0, QC4+, QC5, PD3.1, PD3.0, PPS, Apple2.4A, VOOC, SVOOC, VIFC, UFCS, etc.; Make sure to disconnect any device connected to USB C Male before using Auto Detecting feature. Cable Simulation 50V 5A(240W, EPR), 20V 5A(100W), E-marker(60W), LA135 6.75A, MOTO 6.25A Protocol Trigger This feature can trigger the needed protocol and adjust to a specific voltage. For this specific feature, it supports PD2.0, PPS, EPR, QC2.0, QC3.0, AFC, FCP, SCP, VIFC, UFCS, and VOOC protocols. The original cable is required when triggering the VOOC/SVOOC protocol; Make sure to disconnect any device connected to USB C Male before using Protocol Trigger. VBUS Ripple Test Displays high-frequency ripple voltage on the power line, Presents voltage and current waveforms in a rolling display format. It can detect VBUS ripple. Use the "Left" and "Right" buttons to switch the sample rate between 20.0k 1250μs to 8.0M 3μs. E-marker Cable Test It can test if your USB-C cable has an E-marker chip. By reading the E-marker chip information inside the cable, you can obtain the maximum power, transfer speed, and other information. Apple Charger SN Code Reading Each Apple charger has its own SN code. Specifically, if the SN codes are consistent in the charger, cable, and port, then it is an official Apple product. Data Storage It can independently record data and store it inside. You can view data and export it as a chart in the PC Software. The PC Software The PC software is very powerful. It includes data reading, recording, and exporting, as well as protocol trigger, adjusting voltage, PD protocol test, updating the firmware of the tester, and other functions. It can connect multiple testers at once, theoretically, there is no limit on the number. The PC Software supports Windows 10 and Windows 11 and will be adapted to MAC in the future for everyone to use. Summary of ChargerLAB KM003C These are the ten common functions of POWER-Z KM003C. It can support protocol test, VBUS ripple test, and power reading. The functions also include PC software, E-Marker test, Apple SN code reading, recording data, protocol trigger, etc.