SSUCA 10a PWM Solar Charge Controller

olar charge controller: Regulates battery charging when connected between battery and solar panel. On the LCD you can see the charging status. Protection Level: With overload, short circuit, open-circuit and reverse protection, the device will protect your battery and will increase the battery life Battery types: This updated controller is suitable for all battery types. Make sure to select the correct battery type i.e B1 for lead-acid, B2 for Li-ion, B3 LiFePO. Connection: Connect the battery first with the controller and then the panel. Connections should be in this sequence else the controller will not work. Note: 12V panel will work with 12V battery only and 24V panel will require 24V battery. You can set float voltage, discharge reconnect, discharge stop and work mode.